Homeowners should install a floor spring to improve the functionality and endurance of the doors. Moreover, floor spring door closers are often used in bulky glass doors in hotels and residential buildings. Singapore has plenty of high-end residential buildings, commercial towers, and hotels that necessitate the use of door closers in this city. If you are not aware of the installation process, this guide is extremely helpful for you. The detailed article explains the complete installation process of a floor spring in door closers.

Complete guide to Install a Floor Spring

Floor Spring for Doors

Floor springs are essential mechanical components of door closers that are connected to the bottom of the door. The springs control the movement of the door and ensure a streamlined opening and closing.

Floor Spring Installation in Singapore

Singapore is a busy city and is often associated with high-end buildings and commercial towers. Installing a floor spring door closer is beneficial in this kind of city as it provides stability in door operation without being visually noticed. The commercial building owners should hire professional installers like PS Home Maintenance Singapore which offers door frame repair, door stopper installation, door lock replacements, etc.

However, if DIY enthusiasts want to take up the challenge and install a floor spring in a door closer, the subsequent section will explain the step-by-step process. But before moving onto the process let’s have a look at the tools and materials required for a successful installation.

Required Armoury

A floor spring door closer kit
A drill
Drill bits
A screwdriver
Measuring tape
Pencil or marker
Chisel
Hammer
Level
Wrench
Safety goggles, and gloves

Step-by-Step Guide to Install a Floor Spring in Door Closers

Preparing the Door and Floor

Before installing the door closer, you need to remove the door from its hinges and make sure the area is clean to work. Mark the position of the floor spring installation using a pencil or marker. It’s a general perception that floor springs should be installed at the centre of the door’s bottom edge.

Cutting the Floor

Upcomes the cutting of the floor using a drill machine to orchestrate holes on the market spots. This will make the chisel easier for floor spring installation. Remove the section using a chisel and hammer. Be careful not to damage any other part of the floor. Verify that the depth of the slot complements the floor spring casing.

Installing the Floor Spring Casing

With everything ready, you need to install the floor spring casing into the slot or chiselled section. Ensure the alignment is correct and it is perfectly level with the horizontal floor surface. Drill holes at the required casing spots and the floor. Attached the casing securely with the help of screws. Double-check that the casing is not moving.

Attaching the Door to the Floor Spring

Now you have to attach the door to the floor spring door closer. Align the pivot point on the bottom of the door with the spindle of the floor spring. Verify that the door is correctly placed and can operate smoothly.

Adjusting the Door Alignment

Give it a trial and perform several openings and closings of the door. Ensure it is properly aligned and the door operates seamlessly. Otherwise, adjust the floor spring with the help of screws and do the fine-tuning until the alignment is correct. You should also consider adjusting the closing speed of the door.

Installing the Top Pivot

If the shape and characteristics of your door require installing a top pivot, you should mark its position on the door frame and drill holes. Afterward, place the pivot using screws and verify that it is aligned perfectly with the bottom pivot.

Final Adjustments and Testing

Fine-tune and adjust the door closer as required and perform several openings and closings to ensure that the installation process is successful. Stick to the manufacturer’s instructions throughout the process and enjoy the successful completion of this DIY project.

Conclusion

In conclusion, install a floor spring door closer and improve your door operation significantly. The installation process requires attention to detail and careful measurements and adjustments. With the right tools and instructions, you can get the job done yourself. The above steps will help you successfully install a floor spring door closer.

How to Install a Floor Spring in Door Closer in Singapore