Home » How to Replace a Floor Spring in Singapore
replace the floor spring

How to Replace a Floor Spring in Singapore

This article will help you replace the floor spring in Singapore. Replacing a floor spring in a door can be a compulsion when it does not work well. This causes the door to malfunction or stop closing properly.

Floor springs are often used with heavy glass doors, which are commonly used in homes and commercial buildings in Singapore. Let’s read this article thoroughly to learn more about the replacement process.

Replace a Floor Spring

In Singapore, floor springs are used for glass doors in office buildings and modern homes. These hidden devices control how the door opens and closes. Therefore, they have an essential role in the smooth operation of a door. However, due to frequent use, the floor spring can wear out over time and require replacement. In Singapore’s humid climate, items like springs can be worn much earlier than anticipated. 

This is the reason you will need frequent floor spring replacements in Singapore. Replacing a floor spring is straightforward if you follow proper guidelines and have the right tools to ease you. PS Home Maintenance Singapore is a service provider that offers door lock replacement, slide & swing door replacement, and aluminium door replacement services. It also provides a guideline for DIY enthusiasts to replace the floor spring. Let’s go through their guide:

How to Replace the Floor Spring?

Step 1: Gather Your Tools

Before you start, you’ll need some basic tools on hand. These include a screwdriver, a wrench, Allen keys, a utility knife, and a spirit level. Moreover, you should buy the right replacement floor spring according to the door’s specifications. 

how to replace the floor spring

Step 2: Remove the Door

The first step in this process is to remove the door. You have to loosen the hinges and gently remove the door from the floor spring assembly. You may need a person to support you in this task. Moreover, you need to ensure that the door is placed in a safe, secure area to avoid damage while you work on the floor spring.

Step 3: Access the Floor Spring

Once the door is removed, you can access the floor spring. The floor spring is usually placed in a small compartment beneath the door and covered by a metal plate.

You need to remove the screws holding the floor spring’s cover. Afterward, you’ll see the floor spring mechanism, and you can easily loosen it using a wrench. If the spring is stuck, use a utility knife to remove debris.

Step 4: Remove the Old Floor Spring

Now that you’ve exposed the spring mechanism, the next step is to remove the old floor spring. Remove the bolts connecting the spring to the floor. After removing the bolts, lift the old spring from the floor housing. 

If it’s stuck, you can use a hammer to tap around the edges and loosen it. This is a good opportunity to clean the floor housing to ensure that the new floor spring is installed perfectly. 

Step 5: Install the New Floor Spring

To install the new floor spring, place it into the housing and ensure that it sits perfectly. You can validate its position by using a spirit level. This is crucial because an unbalanced floor spring will cause several issues later on.

When you position the floor spring properly, tighten the bolts to secure it. Afterward, reattach the metal cover to protect it from dirt and moisture.

replacing the floor spring

Step 6: Reattach the Door

When you ensure that the floor spring is properly installed, it’s time to reattach the door. Carefully lower the door back into position and align it with the new floor spring. Ensure the bottom pivot hinge fits into the new floor spring mechanism, then connect the top pivot hinge using the screws. When the door is placed back with the new floor spring, test it by opening and closing it several times to ensure the overall assembly synchronizes.  

Step 7: Final Adjustments

After you’ve reattached the door, check for proper alignment. The door should close smoothly without sticking. If necessary, make additional adjustments to the floor spring and ensure that the work area is cleaned when everything is correct. 

Conclusion

In conclusion, with the right tools and guidance, it is a manageable process to replace the floor spring in Singapore. The above steps explain the complete process of replacing the floor springs from beginning to end. Moreover, regular maintenance and cleaning can ensure a properly operating floor spring system attached to your door. 

Frequently Asked Questions

In the first step, you need to remove the door from the floor springs and replace them with new ones of the same dimensions. When you replace the floor spring, reattach the door and test its functionality.
A floor spring is a hidden warrior that controls the movement of your door. It is usually associated with the large glass doors.
Floor springs prevent doors from moving wild due to excessive force or wind. Therefore, they protect the door and the people around it from injury.
Scroll to Top