Home » Electrician Services » Water Heater Installation

Water Heater Installation

Water Heater Installation


The most important item in a home for maintaining your comfort, convenience, health, and hygiene is a residential water heater. In addition to killing germs and increasing cleaning power, hot water keeps occupants pleasant and clean. For necessary water heater services when your water runs cold, contact PS Home Maintenance.

Put your trust in our highly skilled service technicians to maintain the optimal performance of your tankless system or water heater. Our goal is to guarantee the dependability of your hot water geyser.

Water Heater Installation Services:

Perhaps it’s time for a new geyser if yours is old, rusted, or likely requires a plumber to visit more frequently. We also install newer, more portable, easier-to-maintain water geysers that use less energy. To ensure that a new water geyser is connected and operating appropriately, our team can install it with skill. The best model to install is determined by a thorough analysis of your home’s hot water needs. There are several benefits to purchasing a new water heater, so after we complete the job, you will probably benefit from the following:

· Efficiency:

Modern water heaters heat water more efficiently while using less electricity. Additionally improved are Energy Factor ratings, which measure the amount of hot water generated per unit of electricity. Tankless water heaters save the most space; they are small enough to mount on a wall and can be concealed in a closet. We can also install a more compact electric water heater. This makes room in your house for additional storage.

No More Chilly Showers!

PS Home Maintenance is aware of how inconvenient it can be to be left without hot water when your water heater breaks. For any help you need with the installation, replacement, or repair of the water heater, our service experts are qualified and skilled.

In order to provide warm water for the kitchen or bathroom, water heaters are frequently installed in homes. When users need warm water, water heater failure might be inconvenient, even though it’s not a required item. Our professionals are skilled in fixing a wide range of brands, including Joven and Ariston, and PS Home Maintenance offers storage and instant water heater repairs. We also offer reasonably priced installation and replacement services for water heaters. If your water heater is beyond repair, these are perfect.

Common Water Heater Noise Types and How to Solve Them:

Are you noticing odd sounds coming from your water heater? Perhaps it’s a piercing sound, a shriek, a ticking sound, or a rumbling sound? Your water heater’s numerous noises are indicators of various plumbing issues with your system. Here’s a look at what each sound on your water heater indicates and how to resolve it.

1. A Rumbling Sound:

Is there any rumbling in your water heater system? As your tank’s temperature rises, you’ll probably hear this. The rumbling sound is the result of water expanding and colliding with the sediments.

As more sediment builds up in the bottom of your water heater, this discrepancy between the two gets worse. It might be necessary to handle this build-up immediately if the sounds become notably louder. You need to remove these sediments from your drain in order to fix this. To remove any remaining sludge, you can also use vinegar or a deliming solution.

2. A Ticking Sound:

Does a ticking sound reach your ears? Usually, this indicates the water pressure. The majority of water heater systems make use of heat-trapped water exit and intake nipples. By connecting the pipes to the water heater itself, the nipple improves its efficiency.

This could be the heat trap if you hear a ticking sound. If so, just use a non-heat trap in place of the nipples. When it comes to your plumbing system, most minor noises are actually tiny problems. Another sign that your water heater’s straps are loose is a ticking noise.

Find the source of the ticking sounds first. If the sound is coming from slack straps, you might only need to tighten them. Consider inserting spacers to prevent the pipes from moving if you’ve done that and the ticking sound persists.

Lowering the water’s temperature by a few degrees is another method to silence a ticking sound. This reduces the ticking sound and prevents the pipes from expanding too much. Are you still unsure of the source of the ticking sound? For assistance in identifying and resolving your plumbing issue, get in touch with a qualified HVAC technician.

3. A Popping Sound:

Popping sounds are a prevalent problem in hard-water areas and are a sign of limescale. As water flows through your tank, certain minerals, such as calcium and magnesium, collect at the bottom. These minerals are essential to our health, so don’t be scared.

If not handled appropriately, they could endanger your water heater. These minerals will split and create limescale as the water in the tank heats up. Additionally, steam bubbles may emerge from loose silt at the tank’s bottom. A popping sound results from the sediment bursting when the water warms. To get rid of the popping sounds, our staff will clean and fix your water heater. Flush and drain your tank to get rid of any mineral sediment accumulation. Does your tank have a heating element? To limit additional deposits, try descaling.

When Should You Have a Professional Check Your Geyser?

The inlet/outlet of the pipe, the drain valve, the pressure relief valve, or a hole in the bottom of the tank might all leak. A too-high inbound water pressure could be problematic. Our skilled professionals can handle any repairs.

Your water heater could sustain serious damage from even a small leak. It needs to be taken care of right now. It is frequently possible to fix leaks without having to replace water heater. Finding the leak’s origin is the first objective. Spills must be cleaned up to prevent damage and mould growth, but until the root cause is fixed, the issue will continue.

Our experts may perform a thorough inspection and empty the water heater tank to determine the cause of the issue. When feasible, they can perform repairs and offer advice, including swapping out your outdated water heater for a more modern, reliable model.

For Water Heater Services, Rely On PS Home Maintenance:

All of the major home water heater brands are fully serviced by qualified and certified PS Home Maintenance specialists in your area. From selecting the ideal system for your home to equipment installation, upkeep, repairs, and upgrades, you’ll always get informed assistance. Across Singapore, PS Home Maintenance is a reputable service provider:

  • Direct pricing
  • No overtime fees
  • On-the-way alerts

Frequently Asked Questions:

Which Of The Several Kinds Of Water Heaters That Are Available Is Appropriate For My House?

There are several varieties of water heaters, including heat pumps, solar, tankless (on-demand), and tank-style models. The storage capacity of traditional tank-style heaters makes them ideal for larger households. Compact and energy-efficient, tankless types are ideal for smaller households or those with low water usage. Heat pump water heaters are very energy-efficient and perform well in warm areas.

What Is The Average Time Required To Install A Water Heater?

Depending on the heater type and the current configuration, the installation time varies. A simple replacement of a conventional water heater could take four to six hours. Because tankless water heaters frequently necessitate changes to the plumbing or electrical/gas systems, they may take longer—roughly 6 to 8 hours.

What Are The Advantages Of Having A Professional Install Your Water Heater?

Employing a qualified expert guarantees adherence to regional safety and code requirements. They can effectively tackle problems like low water pressure or venting problems and are skilled in handling intricate plumbing, electrical, or gas connections. A warranty is also usually included with a professional installation.

Does Installing A Water Heater Require A Permit?

To make sure the water heater installation complies with construction and safety regulations, the majority of localities want permits. The permit process is typically handled by a professional installation, but if you’re doing it yourself, you’ll need to apply for a permit and verify local rules.

What Is The Ideal Water Heater Size For My Home?

The size is determined by the hot water requirements of your family. The recommended tank size for tank-style heaters is 30 to 40 gallons for one or two people, 50 gallons for three or four people, and 80 gallons for larger families. The flow rate, expressed in gallons per minute (GPM), determines the size of tankless water heaters. Selecting the appropriate size might be aided by a professional evaluation.

Scroll to Top