Nothing can be more frustrating than a toilet leaking water. A leaking toilet can result in higher water bills and potential water damage if not addressed promptly. Fortunately, fixing a leaking toilet is often a straightforward task that you can handle on your own with some basic tools and a proper understanding of the process. This article will discuss the step-by-step process to fix the leaking toilet in Singapore.

How to Fix Toilet Leaking Water?

A leaking toilet can have various reasons, such as a faulty flapper, a worn-out fill valve, or a damaged wax ring. Locating the cause of the toilet leak in Singapore is the first step towards the solution. PS Home Maintenance Singapore, an expert in toilet plumbing, toilet flush system replacement, and toilet bowl replacement, presents a step-by-step guide to fixing a leaky toilet.

Tools and Materials Needed

The following tools and materials are a necessity to fix a leaking toilet in Singapore.

Adjustable wrench
Screwdriver
Plumber’s tape
Replacement parts
Sponge or towel
Bucket
Rubber gloves
Plunger

Step-by-Step Guide to Fix a Toilet Leaking Water

Step 1: Turn Off the Water Supply

The first step in all plumbing work is to turn off the water. This is essential because it can hinder the repair work and also result in water wastage, which will increase the water bill. Identify and turn off the valve controlling the water supply to the toilet.

If there is no particular valve, turn off the main water supply valve. Flush the toilet to remove the residual water in the tank. Moreover, soak the residue with a sponge or towel.

Step 2: Inspect the Flapper

The flapper is a rubber valve at the bottom of the toilet tank that controls the water flow from the tank to the bowl. A damaged flapper is a common source of toilet leaks. To check the flapper, remove the lid from the toilet tank and look inside. Check for any visual deformation of the flapper.

If the flapper is damaged, replace it with a new one. To do this, dismantle the flapper from the flush handle and the overflow tube and connect it to the new flapper in the same manner. Ensure it creates a tight seal when you close it.

Step 3: Check the Fill Valve

The fill valve controls the water level in the toilet tank. If the fill valve does not work properly, it can cause the toilet to run continuously. To inspect the fill valve, observe the water level in the tank. It should be about one inch below the top of the overflow tube. If the water level is too high, adjust the fill valve according to the manufacturer’s instructions.

If the above solution doesn’t resolve the issue, you may need to replace the fill valve. This is how you can replace the fill valve:

Remove the old fill valve
Install the new fill valve and reconnect the water supply line
Turn the water supply on and check for leaks

Step 4: Examine the Wax Ring

The wax ring is placed between the toilet base and the floor flange. It creates a watertight seal to prevent leaks. Over time, the wax ring can deteriorate and cause leaks at the base of the toilet. To examine the wax ring, you’ll need to remove the toilet.

Here is the process:

Carefully lift the toilet and place it on a towel or blanket to avoid damaging the floor.
Check the wax ring for any signs of damage; if it looks damaged, replace it with a new wax ring.
Remove the old wax ring from the flange and the bottom of the toilet.
Place the new wax ring on the flange and lower the toilet into place.
Ensure it aligns with the bolts. Press down firmly to create a good seal.

Step 5: Reassemble the Toilet

When you replace the wax ring, reassemble the toilet by connecting it to the floor with the bolts. Reconnect the water supply line and turn the water supply back on. Flush the toilet a few times to check for leaks. If everything is working properly, replace the lid on the toilet tank.

Step 6: Test for Leaks

After completing the repair work, it’s important to test for leaks to ensure the issue has been resolved. Check around the base of the toilet and inside the tank for any signs of water. If you notice any leaks, tighten the connections or adjust the components as needed.

Step 7: Regular Maintenance

Regular maintenance is necessary to keep the toilet in good condition. Check all the components of a toilet periodically to avoid an expected issue in the future. Do not overuse harsh chemical cleaners because they can damage the rubber components of the toilet.

Conclusion

With the right tools and the detailed steps, it does not have to be daunting for you to fix a toilet leaking water. You need to inspect and identify the root cause of the leaking toilet and fix it permanently. Moreover, regular cleaning and maintenance can help you be aware of the toilet component’s condition and can save you from unexpected issues like leakages.

How to Fix Toilet Leaking in Singapore: A Step by Step Guide