If you want to divide your space elegantly, install a glass partition wall. Installing a glass partition wall in an office is a popular choice in Singapore due to its modern look. Partition walls divide the space, and you can take the maximum advantage of that division. In Singapore, the space is limited, and the building regulations are strict. If you want to build a concrete partition, you may need to ask the authorities and once built, you cannot change it.
The portable glass partitions can be a better solution to maximise the space within the building regulations. Therefore, this article explains the process of installing a glass partition in the modern offices of Singapore.Â
How to Install a Glass Partition Wall in Singapore?
Glass partition walls are becoming highly popular in offices in Singapore. They enhance the attraction of a workspace and improve its functionality. Moreover, they create distinct areas without blocking light and make the space feel closed off. Installing a glass partition wall might seem daunting, but with the right tools and guidance, it’s a simple DIY project.Â
Therefore, PS Home Maintenance Singapore provides water heater installation, false ceiling installation, and waterproofing services, and a guideline for glass partition wall installation in Singapore. Let’s go through the guide to review the process and build a glass partition wall.Â
Step 1: Planning and Measuring
The first step to installing a glass partition wall is proper planning. Decide the exact place for installation and consider factors such as the flow of natural light, the need for privacy, and the overall layout of the office. Once you’ve determined the location, take the measurements accurately. It’s crucial to get precise measurements to ensure that the glass panels will be placed perfectly.
Measure the height and width of the area where the glass partition will be installed. Make sure to measure at multiple points along the wall and floor. Note down these measurements, as they will be used to place the glass panels properly.
Step 2: Choosing the Right Glass
Choosing the right type of glass is necessary for the look and safety. In Singapore, tempered glass is a popular choice for office partitions due to its strength and safety features. Tempered glass is much more sturdy than regular glass. Moreover, if it breaks, it shatters into small, less harmful pieces.
You can also look for frosted or tinted glass, depending on your office’s design requirements. Frosted glass offers more privacy. Another option for glass partition is the clear glass, which gives a more open feel. Ensure that the thickness of the glass is appropriate for the height and width of the partition. This is important for the stability of the partition.Â
Step 3: Preparing the Workspace
Before you begin to install a glass partition wall, prepare the workspace. Take out the furniture and other items that could obstruct the installation process. Ensure that the floor is clean because it is compulsory for an unobstructed installation process and seamless results. It’s also a good idea to mark the position of the glass partition on the floor and walls using masking tape.Â
Step 4: Installing the Tracks
The next step is to install the tracks that will hold the glass panels. These tracks are usually made of aluminium and need to be perfectly connected to the floor and ceiling. Mark the position of the tracks on the floor and ceiling to ensure they are perfectly aligned.
Make holes in the marked positions and then screw the tracks into the slot. Ensure the tracks are perfectly balanced and can bear the weight of the glass panels.
Step 5: Installing the Glass Panels
Once the tracks are placed, it’s time to install the glass panels. Be careful with this step because the glass is heavy and delicate. It’s recommended to have at least one or two people for your assistance during this process.
Lift the glass panel and place it into the floor track. Afterward, tilt the panel into place so that it fits into the ceiling track. Ensure the glass panel is appropriately adjusted in both tracks and is perfectly balanced. If you have to install multiple panels, repeat this process for each one.
Step 6: Sealing and Finishing
After the glass panels are installed, seal the edges where the glass connects the tracks. This will prevent dust particles from entering and ensure a perfect finish.Â
Finally, inspect the installation to ensure that everything is properly working and well in place. Clean the glass panels to remove any fingerprints, and your glass partition wall is ready to use.
Conclusion
You can upgrade the current look of the space if you install a glass partition wall. This maximises the available space and gives your office an upgraded look. While the installation process requires careful planning and precise execution, following the above steps will help you get professional results.