Install a shower kit in your bathroom and significantly enhance its functionality. Installation of a shower kit is a necessity either you are upgrading your bathroom or updating the shower only. Installation of a shower kit can be a manageable DIY task with the right tools and approach. This article will explain the details of shower kit installation in Singapore. Read through the article to have a clear understanding of the installation process.

How to Install a Shower Kit?

Installing a shower kit can improve your daily routine. A shower kit consists of all the components required to install a new shower. Shower kit installation in Singapore might seem daunting, but it is a simple process with the right guidance and proper tools.

PS Home Maintenance Singapore offers all sorts of plumbing services like water tap replacement, toilet plumbing, kitchen sink replacement, and guidance to install a shower kit in your bathroom. Let’s go through the guide to understand the process thoroughly.

Step 1: Gather Your Tools and Materials

Before you start, make sure you have all the necessary tools and materials. The provisional list of tools and materials includes:

Shower kit
Drill and drill bits
Screwdriver
Adjustable wrench
Plumber’s tape
Silicone sealant
Measuring tape
Level
Pipe wrench

Step 2: Prepare the Work Area

First of all, prepare your bathroom for the installation. Ensure the water supply to the bathroom is turned off to prevent any leaks and spillage of water during the shower kit installation. Remove the old shower fixtures carefully.

If you’re installing a brand-new shower kit, make sure the area is clean. It is recommended to cover the bathroom floor with a drop cloth to protect it from scratches. Also, use safety glasses and gloves throughout the process for your safety.

Step 3: Install the Shower Valve

The shower valve controls the water flow and temperature. Proper installation is the key to the correct functionality of the shower. Identify the current plumbing and mark the placement of the new shower valve.

Use a drill to create holes for the valve and its components. Insert the valve into the holes and tighten it with screws. Use an adjustable wrench to connect the water supply lines to the valve. Wrap the plumber’s tape around the threads to prevent leaks. Inspect the straightness of the valve using a level.

Step 4: Attach the Showerhead and Faucet

It’s time to attach the showerhead and faucet. Wrap the plumber’s tape to the threads of the shower arm. Place the showerhead onto the shower arm and tighten the screws with a wrench. Connect the tap to the water supply line and tighten it with screws.

Ensure all connections are tight to prevent leaks. Avoid over-tightening the connections, as this can damage the threads. You can also use a cloth or towel to tighten the screws and avoid scratches.

Step 5: Install the Shower Enclosure

Some shower kits include an enclosure and there is a simple process to install it. Assemble the frame as per the manufacturer’s instructions. Place the enclosure in the desired area and inspect the straightness with a level. Attach the frame to the wall and tighten the screws.

Connect the enclosure panels to the frame and fit them with screws. Use silicone sealant around the edges of the enclosure to prevent water leaks. Allow the silicone sealant to dry completely and then use the shower. Carefully follow the manufacturer’s instructions for the best results.

Step 6: Connect the Water Supply

When you install the enclosure, it’s time to connect the water supply. Turn on the main water supply to your home. Slowly open the shower valve to let the water flow through the new fixtures. Inspect all the connections for any leaks and tighten them if necessary.

Test the showerhead and faucet to ensure the correct functionality. If you notice any leaks, turn off the water supply and recheck the connections. The hot and cold water connections should be connected to the correct sides of the valve.

Step 7: Final Checks and Cleanup

After you are done checking the shower and it works correctly, you should end the installation project by cleaning the area. Test the shower again to ensure everything is functioning properly. Clean the fixtures and enclosure with a clean cloth to remove any fingerprints. Take off the drop cloth and dispose of any packaging materials. Regularly check the shower fixtures for leaks after installation.

Conclusion

It can be a rewarding DIY project to install a shower kit that elevates the bathroom functionality. This step-by-step guide helps you install a shower kit efficiently and inspect it for proper working. The new shower kit can refresh your bathroom and give you a sense of satisfaction.

How to Install a Shower Kit in Singapore