Install a storage heater, if you want to have warm water all the time throughout the winter. Installing a storage heater in Singapore can greatly improve your home’s comfort and provide a steady supply of hot water for showers and daily life matters.

While the process may seem complicated, understanding the essential steps can make it more manageable. Proper installation ensures the heater functions safely and efficiently. Therefore, this article explains the method for proper installation of storage heaters in Singapore.

How to Install a Storage Heater?

Installing a storage water heater Singapore is a technical task and needs some basic tools and attention to detail. PS Home Maintenance Singapore comes forth to explain the complete step-by-step process for installing a storage heater in Singapore. Moreover, they also provide water heater installation, electrician, and plumbing services in Singapore. Here’s the complete process:

Gather the Necessary Tools and Materials for the New Storage Heater Installation

Before beginning storage heater installation, it is important to ensure you have all the necessary tools and materials. The required tools include the storage heater unit, pipes, brackets, screws, a drill, and a wrench.

Moreover, you also need to familiarize yourself with the manufacturer’s manual. This manual provides specific instructions tailored to your heater model.

Choose the Right Location

Start by identifying a suitable location for the storage heater. The spot should be close to your bathroom or kitchen to minimize heat loss and energy consumption. The wall must be strong enough to support the weight of the heater when it is filled with water.

If necessary, strengthen the wall before proceeding. Moreover, ensure there is an accessible power outlet nearby for the heater’s electrical connection.

Install the Mounting Brackets

When you select a location, measure and mark the mounting points for the heater’s brackets. Use a drill to create holes at the marked points, then place the brackets strongly on the wall. Verify that the brackets are level and tightly fixed, as they will bear the weight of the heater.

Install a Storage Heater

Next, carefully place the storage heater onto the brackets. Ensure it is securely positioned to prevent any movement or imbalance. Follow the manufacturer’s guidelines for connecting the heater to the water supply.

In this process, you need to attach cold and hot water pipes to the inlet and outlet points of the heater. Use a wrench to tighten the connections, but avoid over-tightening, as this may damage the fittings.

Check for Leaks

After connecting the water pipes, check for any leaks by slowly turning on the water supply. Let the tank fill and inspect all connections. If any leaks are detected, tighten the fittings or apply a plumber’s tape to seal the joints. It is important to ensure leak-free connections for the heater’s performance and safety.

Connect to the Power Supply

The next step involves connecting the storage heater to the power supply. This task should ideally be performed by a licensed electrician to ensure compliance with Singapore’s safety regulations.

The electrician will install the necessary wiring and circuit breaker to protect the heater from electrical surges. It is recommended to avoid attempting electrical work on your own unless you are qualified to do so.

Test the Heater

Once the heater is connected to both water and power supplies, test its functionality. Turn on the power and set the desired temperature according to the manufacturer’s instructions.

Allow the heater to run for a few minutes, then check if the water temperature meets your expectations. Adjust the settings as needed to achieve optimal performance.

Perform a Final Inspection

It is essential to conduct a final inspection of the entire installation. Ensure the heater is perfectly mounted, all connections are leak-free, and the electrical wiring is properly insulated. Moreover, regular maintenance will prolong the heater’s lifespan and maintain its efficiency.

Conclusion

Installing a storage heater in Singapore involves careful planning and attention to detail. By following these steps and adhering to safety guidelines, you can enjoy the benefits of hot water in your home. If you are unsure about any part of the process, seek assistance from a professional plumber or electrician to ensure a safe and successful installation.

Frequently Asked Questions

Where to put a storage heater?

Storage heaters are typically installed in the above false ceiling due to their large size and design. If this is not feasible at your location, you can also choose to install the storage heater onto the wall with the help of a shelf bracket. However, it is essential to ensure that the wall is strong enough to bear the load of a filled storage heater.

How long does it take to install a storage heater?

The installation time varies depending on the number of heaters and the complications involved on the installation site. On average, it can take a few hours per heater. It is recommended to aim for the times of day when the disruption to daily routines is minimal.

How does a storage heater work?

Storage heaters store heat generated by cheaper night-time electricity and release this heat during the day when the electricity is expensive. Most storage heaters are wall-mounted and have a similar look to radiators.