How to Unclog a Bathroom Sink in Singapore

Unclog a bathroom sink to avoid inconvenience in your home. Clogged bathroom sinks are a common household issue that can result in slow drainage or complete blockages. Fortunately, it is not so difficult to unclog a bathroom sink, and you can often handle it on your own. This detailed article will explain the step-by-step process to unclog your bathroom sink efficiently.

How to Unclog a Bathroom Sink in Singapore?

A clogged bathroom sink is a source of unpleasant odors and resultantly a continuous headache to the homeowners. There can be several reasons behind a clogged bathroom sink. Whatever the reason might be, you need to unclog a blocked bathroom sink promptly. Delaying the bathroom sink unclog process can result in several issues, including discomfort in the home. 

PS Home Maintenance Singapore is a well-known multi-service brand that offers toilet plumbing services like toilet bowl replacement and toilet flush system replacement. They provide a step-by-step guide to unclog a bathroom sink with standing water. Let’s go through the process. 

Step 1: Gather Your Tools and Materials

Before you begin, ensure that you have the necessary tools at hand. This will streamline the unclogging process. Generally, you will require the following tools and materials to unclog a bathroom sink: 

• Rubber gloves 
• A plunger
• A bucket 
• Baking soda 
• Vinegar
• Boiling water 
• An adjustable wrench
• An old toothbrush or wire brush
• A plumber’s snake

Step 2: Clear the Sink Area

Clear the working area and remove the items from and around the sink to make a comfortable working space. Place a bucket underneath the sink to collect any water or debris. This will help keep the area clean and make cleanup easier.

Step 3: Remove Visible Debris

Wear rubber gloves and check the sink drain for debris. Remove the debris that is accessible through your finger. Through this step, you will clear the large and visible debris and will have better drainage.  Sometimes, this is all you need to do, but most of the time, the issue is not as simple. 

Step 4: Use a Plunger

If the sink is still clogged, try a plunger to unclog it. A plunger is used on the drain to take out the possible reasons for the clog. Fill the sink and put the plunger’s rubber part on the drain. Press the plunger firmly and pump it up and down repeatedly for about 30 seconds. The created pressure should dislodge the clog. 

After this, check if the water drains normally or if there is still a need to plunge. Do it again until the water drains properly, and if the problem persists after several sessions, explore another unclogging option. 

Step 5: Apply Baking Soda and Vinegar

If the plunger doesn’t work, use a natural solution of baking soda and vinegar. Put half a cup of baking soda into the drain and then half a cup of vinegar. The mixture will react and create bubbles as a result. 

These bubbles help break down the clog. Let it do the work for about 15-20 minutes. In the meantime, boil a kettle of water. After the waiting period, put the boiled water into the drain. This will clear all the clogs, and the water will drain through.

Step 6: Clean the P-Trap

If the sink is still clogged after applying the above methods,  the next step is to clean the P-trap. The P-trap is the-shaped pipe underneath the sink. Debris often suspends in the bend of this pipe. Here is the method to clean the P-trap.

1. Use a bucket under the P-trap to collect any water or debris.
2. Use an adjustable wrench to loosen the slip nuts of the P-trap.
3. Carefully remove the P-trap and empty it into the bucket.
4. Clean the P-trap completely with an old toothbrush or wire brush.
5. Reassemble the P-trap and tighten the slip nuts.

After doing this, inspect the sink drain to see if it’s clear or needs further treatment. 

Step 7: Use a Plumber’s Snake 

If the clog is too stubborn to resist all the above methods, use a plumber’s snake. A plumber’s snake is a large and flexible plumbing tool to reach the depth of the drain and clear the clogs. The plumber’s snake is used as follows:

1. Put one end of the plumber’s snake into the drain.
2. Turn the handle clockwise to help the snake reach into the drain.
3. Continue pushing the snake into the drain until you feel resistance.
4. Rotate the snake to break up the clog.
5. Slowly pull back the snake and bring the debris out with it.
6. Run the water and check if the drain is clear.

Conclusion

In conclusion, a homeowner can easily unclog a bathroom sink using any of the methods mentioned above. However, it is essential to take preventive measures as well and not let the undissolvable debris run through the sink drain. Regularly clean the sink and periodically pour cleaning solutions into the drain to maintain the water flow. If your problem is not solved with all the techniques discussed above, it is better to hire a professional plumber to unclog the bathroom sink. 

Frequently Asked Questions